Leaving a pool table uncovered invites settled dust (which grinds into the cloth fibers under rolling balls), sun fading, and accidental spills. The Viper Billiard Table Cover (SKU 27-0817, 1.3 lb) uses a tough resin barrier and fitted elastic edges to seal tables up to 9 feet.
Every specification below is verified directly against primary manufacturer documentation published by Viper (GLD Products) (reference: Official Manufacturer Specification Page).
Specification Field
Verified Manufacturer Value
Brand / Manufacturer
Viper (GLD Products)
Model Designation
Fitted Table Cover 27-0817
Manufacturer Sku
27-0817
Material
Durable tear-resistant resin material
Fit Style
Fitted elastic edges that hug the table perimeter (fits most tables up to 9 ft)
Protection
Shields cloth and rails against dust, dirt, spills, pets, and sun fading
Packaged Dimensions
10.0 in L × 10.0 in W × 2.5 in H
Weight
1.3 lb
Key Engineering & Setup Takeaways
Fitted elastic edges grip the outer rails so the cover stays anchored rather than sliding off like flat vinyl drapes.
Durable resin barrier blocks airborne dust, beverage spills, pet hair, and UV sunlight fading when the table is idle.
Universal elastic sizing fits standard home tables up to 9 feet in length (GLD SKU 27-0817, 1.3 lb).
Folds compactly when play starts and extends the life of both wool-blend and worsted cloths.
Manufacturer Sku: 27-0817 · Material: Durable tear-resistant resin material · Fit Style: Fitted elastic edges that hug the table perimeter (fits most tables up to 9 ft)
Ball Diameter: 57.2 mm (2-1/4 in) regulation pool · Material: Genuine Belgian Aramith phenolic resin with embedded wear-resistant patterns · Pattern Design: 2-sided cue ball: beginner side + advanced player side designed by Jim Rempe
Brand: Viper (GLD Products) · Category: Racks & Training Accessories
A loose break rack ruins 8-ball spreads before the cue tip ever touches the cue ball. The Viper Solid Hardwood Triangle Rack (SKU 27-0100, 11.6 × 11.6 × 1.25 in, 0.35 lb) uses rigid wood walls and reinforced corners to press regulation 2.25-inch pool balls into a tight pack.
Solid hardwood construction with reinforced corners resists the flexing and bowing common to thin plastic triangles.
Sized specifically to pack fifteen regulation 2.25-inch (2-1/4 in) pool balls into a tight break formation.
Measures 11.6 in × 11.6 in × 1.25 in and weighs 0.35 lb (GLD Products SKU 27-0100).
Pairs with the matching Viper Solid Hardwood 9-Ball Diamond Rack (SKU 27-0104, 12.0 in × 8.0 in × 1.0 in).
Best for: Replacing the flexible plastic triangle bundled with most starter tables so fifteen 2-1/4-inch balls freeze tightly for clean break shots.
Watch out for: Sized exclusively for 2.25-inch (57.2 mm) pool balls; 2-1/16-inch snooker balls and 2-7/16-inch carom balls will not fit properly.
Brand: Aramith (Saluc SA) · Category: Racks & Training Accessories
Developed with Hall of Famer Jim Rempe and molded in Belgium from genuine 57.2 mm (2-1/4 in) Aramith phenolic resin, this two-sided training cue ball embeds beginner and advanced target rings under the surface and includes a 56-page manual with 13 shot diagrams.
Genuine 57.2 mm (2-1/4 in) Belgian Aramith phenolic cue ball with two distinct aiming rings embedded beneath the wear-resistant surface.
One face provides a wider beginner target pattern; rotating the ball reveals a finer advanced pattern for pinpoint tip placement.
Includes Jim Rempe's 56-page pocket-size instruction manual in English, French, and Spanish with 13 multi-variation shot diagrams.
Shows exact chalk mark contact after each stroke so players can diagnose unwanted side spin or crooked follow-through.
Best for: Beginners learning follow, stop, and draw as well as intermediate players refining English and next-shot cue ball shape.
Watch out for: Because the aiming rings sit beneath a clear phenolic surface layer, always clean chalk marks off with silicone-free ball cleaner rather than abrasive pads.
Brand: Casemaster (GLD Products) · Category: Cue Care & Maintenance
GLD Products' Casemaster Parallax Cue Case (SKU 51-0400-03) combines a water-repellent 600D Oxford fabric shell with custom-molded interior foam slots that secure one cue butt, one shaft, and a spare cube of chalk against impacts and humidity swings.
Tightly woven 600D Oxford polyester fabric repels moisture and resists abrasion during league travel or storage.
Form-fitting internal foam slots cradle one disassembled two-piece cue (1 butt and 1 shaft) so parts never clatter together.
Dedicated interior slot holds a spare chalk cube alongside the cue.
Slim profile with a rubber carry handle makes transporting a personal two-piece cue straightforward.
Best for: Players who own a two-piece cue (such as a 58-inch maple or fiberglass cue) and want padded, water-repellent storage for league nights or seasonal protection.
Watch out for: Holds a single disassembled two-piece cue (1 butt, 1 shaft); it cannot hold one-piece 57-inch house cues or extra break/jump shafts.
Who is the Viper Heavy-Duty Fitted Billiard Table Cover best suited for?
Home tables in multi-use basements, family rooms, or sunlit spaces where dust, drinks, or pets can damage uncovered felt.
What is the main limitation to consider before choosing the Viper Heavy-Duty Fitted Billiard Table Cover?
Fitted elastic pulls snug over 7-foot and 8-foot cabinets; on compact 6-foot folding tables, tuck any extra slack under the corners.
We use optional analytics and advertising cookies (Google Analytics 4 and Meta Pixel) only if you consent. Essential local storage remembers your choice. See our Privacy Policy and Cookie Policy.